Robots that find their own way, with no floor markers
Autonomous navigation, real-time mapping, obstacle detection: this is how our robots clean your floors on their own, in support of your teams.
They get everywhere, including your site
Nothing like a domestic robot vacuum that bumps into things and sets off again at random.
- Mapping by our technician. Nothing for you to prepare.
- The robot finds its own way. No floor markings, no remote driving.
- Fixed obstacles already in memory. Columns, racking, machines.
- The unexpected detected live. A person, a trolley passing by.
Not sure about your aisles? The demonstration takes place on your floors.
The robots we deploy
The model is chosen on what your floor requires, not on its size. Two families, nine machines. Hover over a card for its specifications. New: the PUDU GT range of commercial robotic mowers for the green spaces around your sites, presented at GaLaBau in September 2026. To place our machines within the wider market, see the autonomous floor scrubber category and the guide to commercial cleaning robots.
Dry cleaning3 machines
Sweeping and vacuuming, without water. For dry floors with high volumes of dust and debris: warehouses, workshops, main circulation routes.
PUDU MT1
The sweeper for long aisles
Dry sweeping over long distances. Targeted mode climbs to 6,000 m²/h when a zone needs catching up.
- Standard throughput1,800 m²/h
- Cleaning width70 cm
- Debris hopper35 L
- Runtime4 to 8 h
PUDU MT1 Max
For very large volumes
Designed for sites of more than 100,000 m². The highest productivity in the range, sustained over eight hours.
- Standard throughput2,200 m²/h
- Cleaning width70 cm
- Target floor areas> 100,000 m²
- Runtimeup to 8 h
PUDU MT1 Vac
Carpet and hard floor, no adjustment needed
Recognises the floor covering in real time and switches mode accordingly. The model for mixed-surface floors.
- Standard throughput1,400 m²/h
- Cleaning width55 cm
- Surface recognitionReal-time AI
- Debris hopper6 L
Dry and wet, in a single pass6 machines
Sweeping, vacuuming and scrubbing carried out in sequence by the same machine. For floors that soil deeply: food processing, healthcare, sales floors, hotels.
PUDU ET1
The small-space specialist
Fifty centimetres wide: it fits between shelving, scrubs with hot water and returns to its station on its own. Shops, pharmacies, restaurants and small office floors.
- Target floor area100 to 800 m²
- Minimum passage width50 cm
- Hot waterup to 85 °C
- Docking station8-in-1
PUDU CC1
The compact 4-in-1 floor scrubber
Sweeps, vacuums, brushes and scrubs in a single pass. The format that gets everywhere, from office floors to narrow corridors.
- Scrubbing throughput700 to 1,000 m²/h
- Runtime~5 h
- Tanks15 L / 15 L
- Edge cleaning< 6 cm
PUDU CC1 Pro
The CC1 for intensive use
Same format, same agility, with upgraded equipment for back-to-back cycles and full working days.
- Scrubbing throughput700 to 1,000 m²/h
- Runtime~5 h
- Tanks15 L / 15 L
- Modes4-in-1
PUDU BG1
Sweeping and scrubbing in a single pass
Two operations in the same run. The side brushes extend the working width to 70.8 cm.
- Standard throughput2,000 m²/h
- Working width70.8 cm
- Battery90 Ah, 48 V
- Detergent2 × ~3.5 L
PUDU BG1 Pro
The 2-in-1 for continuous operation
Same principle as the BG1, with the runtime to last a full operating day.
- Standard throughput2,000 m²/h
- Working width70.8 cm
- Runtimeup to 7.5 h
- Platform48 V
PUDU SH1
Powerful suction, in a small footprint
20,000 Pa of suction in a body that reaches the areas the larger models cannot.
- Suction20,000 Pa
- Productivity1,100 to 1,600 m²/h
- Cleaning width44 cm
- Runtime70 min, 100 in ECO mode
What they really do
Four sequences filmed without editing, and the report the robot produces after every run.
What they clean
The quality of the pass, on different materials and along the edges.
Fine powder, sawdust, grit, swarf: four materials laid side by side, collected in a single pass.
PUDU MT1 · sweepingThe edge is the zone a hand-driven machine misses most often. The side squeegee hugs the wall: no dirty strip is left along the partitions.
PUDU BG1 · edgesWhat they report
The detail of every run, ready to file in a quality record.
Every run is counted
The report gives the area cleaned, the cleaning time, the volumes of clean and waste water, the day-by-day curve and the map of the most frequently covered zones. Enough to document a quality check without re-entering anything.
- 33,723 m²cleaned over the period
- 50 hof cleaning in total
- > 4×/dayon the busiest zones
What they do without you
Machine upkeep and the division of work.
Back at their station, the robots wash their brushes, discharge the waste water and refill with clean water. Nobody has to step in between two cycles.
PUDU CC1 · docking stationThe CC1 scrubs, the MT1 Vac follows behind it to pick up the residual dust. On large floor areas, the robots share the work instead of getting in each other's way.
PUDU CC1 + MT1 Vac · as a pairThe questions we are asked about the range
Which Pudu robot for which type of site?
How many robots does a 5,000 m² site need?
Do Pudu robots use the lift?
Who distributes and maintains Pudu robots?
Which robot for your floors?
We choose the right equipment together during the free on-site demonstration; you do not have to decide alone.