PUDU GT: commercial robotic mowers
Three electric robotic mowers that cut, collect grass and leaves, empty their hopper and move between zones on their own, with no perimeter wire. The range was shown at GaLaBau 2026: read our GaLaBau report.
Easy to Clean is an authorised PUDU distributor: demonstration on your site, all-inclusive rental or purchase with maintenance. Delivery lead times confirmed case by case.
Three models, three types of ground
Manufacturer data from the PUDU GT3, GT5 and GT7 brochures, checked on 28 September 2026.

GT3
Corporate campuses, factories, logistics centres: it mows, collects and sweeps pathways.
See the model page
GT5
Parks, public grounds, schools, airport grounds: up to 6.5 ha per charge.
See the model page
GT7
Golf courses and sports pitches: 5 to 50 mm cut, slopes up to 30°.
See the model pageMow, collect, sweep: one machine all year round
91 cm width of cut and 450 kg, for sites split into zones: corporate campuses, factories, logistics centres, resorts.
The GT3 at work
Mowing, collection, pathway sweeping and transit between zones: the manufacturer's 32-second presentation video.
- 5,000 m²/h stated
- 2 ha per charge, 4 to 5 h runtime
Up to 6.5 hectares on one charge
1.52 m width of cut, 8,000 m²/h stated and 8 to 10 h runtime, for municipal parks, cemeteries, schools and universities, airport grounds.
The GT5 at work
Large-area mowing, leaf collection, auto-dump and task resumption: the manufacturer's presentation video.
- 8,000 m²/h stated
- 6.5 ha per charge, 8 to 10 h
Precision reel mowing
Three floating reel units over 1.60 m, 5 to 50 mm cut, four-wheel drive and slopes up to 30°: for fairways, tees, approaches, roughs and sports turf.
The GT7 at work
Reel mowing, striping patterns, slopes and transit between holes: the manufacturer's presentation video.
- 8,000 m²/h stated
- 7 ha per charge without collection
Navigation with no perimeter wire
RTK positioning, LiDAR and vision, fused: that is what lets it mow alone, to the centimetre, on grounds open to the public.
It adapts its response to the risk
Pedestrians, vehicles, hoses, light poles: it recognises them and, depending on the risk, slows down, bypasses or stops. An emergency stop and remote control let you take over.
- Pedestrian and vehicle avoidance
- Remote control up to 3 km
RTK, LiDAR and vision together
RTK gives position to ± 2.5 cm, LiDAR and cameras see obstacles and turf boundaries. On the GT7, surround-view cameras, depth cameras and ultrasonic sensors add 360° awareness.
- RTK ± 2.5 cm
- Maps up to 100 ha
Fast mapping
It explores the ground and generates its map; on the GT5, zones can also be drawn from satellite imagery, with no manual perimeter survey.
Remote management
Live location, task progress, system health and alerts, through the app and fleet management platform.
IP66, all-metal chassis
All-metal chassis and IP66 rating, for rain, dust and long days outdoors.
Load platform
Up to 90 kg carried on the platform, on all three models.
The three models, specification by specification
Manufacturer data (PUDU GT3, GT5, GT7 brochures), checked on 28 September 2026. n/p: not published.
| Specification | PUDU GT3 | PUDU GT5 | PUDU GT7 |
|---|---|---|---|
| Cutting type | Rotary, 3 blades | Rotary, 3 blades | Reel, 3 floating units |
| Width of cut | 914 mm | 1,520 mm | 1,600 mm |
| Height of cut | 38 to 114 mm | 38 to 152 mm | 5 to 50 mm |
| Edge trimming distance | 50 mm | 50 mm | n/p |
| Sweeping | Yes, 390 mm, blades off | n/p | n/p |
| Hopper | 60 L | 100 L | 130 L |
| Stated mowing rate | 5,000 m²/h | 8,000 m²/h | 8,000 m²/h |
| Mowing and transport speed | 10 km/h | 10 km/h | 10 km/h |
| Slope and side slope when mowing | 15° | 20° | 30° |
| Battery | 13 kWh, LFP | 26 kWh, LFP | 26 kWh, LFP |
| Runtime | 4 to 5 h | 8 to 10 h | 8 to 10 h |
| Area per charge | 2 ha | 6.5 ha | 7 ha (no collection) |
| Charging standard / fast (option) | 4 to 5 h / 2.2 h | 10 h / 5 h | 10 h / 5 h |
| Dimensions (L×W×H) | 1,602 × 947 × 1,124 mm | 1,910 × 1,586 × 1,293 mm | 1,950 × 1,600 × 1,400 mm |
| Weight with batteries | 450 kg | 850 kg | 950 kg |
| Platform load | 90 kg | 90 kg | 90 kg |
| Drive | Zero-turn | Zero-turn | Four-wheel drive |
| Positioning | RTK ± 2.5 cm, LiDAR, vision | RTK ± 2.5 cm, LiDAR, vision | RTK ± 2.5 cm, LiDAR, 360° vision, ultrasonic |
| Maximum map area | 100 ha | 100 ha | 100 ha |
| Remote control range | 3 km | 3 km | 3 km |
| Ingress protection | IP66 | IP66 | IP66 |
The grounds targeted by the manufacturer
GT3 · corporate sites
Corporate campuses, factories, logistics centres, resorts: lawns, pathways and internal roads, from 1 to 5 ha. Mowing, leaf collection and sweeping.
GT5 · public grounds and campuses
Municipal parks, museums, cemeteries, streets; high schools, campuses and universities, stadium surrounds; airports and heliports. Open lawns from 1 to 5 ha, mowing and collection.
GT7 · golf and sports turf
Fairways, tees, approaches, roughs, sports pitches: where cut quality, striping and slopes matter as much as area.
The same sites, inside and out
The warehouses, factories, campuses and public facilities we clean also have lawns, pathways and grounds to maintain, with the same constraints: crews that are hard to recruit, large areas, tight time slots. The GT range brings to grounds maintenance what our robots already do on floors: the machine covers the surface, the team keeps the finishing, flower beds, tree bases and quality control. How this kind of machine compares with a ride-on or a garden robot is explained in our guide to the autonomous commercial lawn mower.
The same contact handles the demonstration, zone set-up, training and maintenance, for floor robots and robotic mowers alike. See our PUDU range and how our service works.
What we check with you during the demo
A robotic mower is not improvised: these points decide the model and the set-up.
Slopes and side slopes
15° for the GT3, 20° for the GT5, 30° for the GT7. Beyond that, the zone is excluded from the map and stays manual.
Satellite reception
RTK needs a clear view of the sky. Under dense tree cover or next to tall buildings, path holding is checked on site.
Weight and access
450 to 950 kg: gates, passages between zones and waterlogged ground are checked before transit routes are drawn.
Dumping and charging
A dump point for clippings and a charging spot (3.3 kW standard, 6 kW fast option) to plan along the route.
What stays with the team
Flower beds, tree bases, slopes beyond the limit, hedge trimming and control: the machine covers the surface, the team keeps the finishing.
Area and frequency
Actual area per zone, target height of cut and mowing frequency set the model and the number of machines.
The GT range, on monthly rental or purchase
Both options of our offer apply to the GT range. Delivery lead times, maintenance and replacement terms are confirmed in the quote, after the demonstration on your site.
All-inclusive monthly rental
A single monthly fee. The robot, maintenance, parts, blades and consumables, updates and replacement in the event of a breakdown.
- No down payment, no capital tied up
- Operating expense, off balance sheet
- Model can be changed if your grounds change
Purchase with maintenance contract
The robot becomes your asset. The accompanying maintenance contract, which is mandatory, covers preventive maintenance, wear parts and software updates.
- Depreciable asset
- You own the equipment outright
- Quote drawn up after the demo
The demo, set-up, training and maintenance are the same in both cases. Compare the two models point by point →
The questions about the GT range
What is the PUDU GT range?
Which model should I choose for my site?
How much ground does a PUDU GT robotic mower cover?
How does the robotic mower find its way without a perimeter wire?
Does the PUDU GT collect grass and leaves?
Can it work on slopes and in the rain?
Is a PUDU GT robotic mower noisy?
How is it made safe on grounds open to the public?
How long does charging take?
Does Easy to Clean offer the PUDU GT robotic mowers?
What did Pudu show at GaLaBau 2026?
Green spaces to maintain on your sites?
Tell us where and how much ground: we arrange the demonstration and propose the right model.