Robotic cleaning easy to clean easy to carry Robotic handling
Talk to us
Robot profile · i-team

i-team co-botic 65 · specs, operator review and alternatives (2026)

The i-team co-botic 65 is an autonomous ride-on scrubber (driven or robotic) for large open areas, logistics, manufacturing and retail, first shown at the end of 2022. It scrubs a 610 mm path with 25 kg of brush pressure, carries 58 L of water and posts the best observed productivity in the i-team range (1,400 m²/h). Two limitations: a runtime of only 80 minutes, and 2D camera navigation with no LiDAR. Price and availability on request.

At a glance

TypeAutonomous ride-on scrubber (driven + robotic)
Manufacturer / yeari-team Global · 2022
Cleaning width610 mm
Tanks58 L clean water · 55 L recovery
Brush pressure25 kg
Productivity2,745 m²/h rated · 1,400 m²/h observed
Runtime1.3 h (80 min)
Turning radius2,500 mm
Weight208 kg (349 kg gross)
Commercial modelPurchase, rental or RaaS · price on request
Verified on16/07/2026 · CSV v39

Technical data

FunctionFloor scrubber (hard-floor scrubbing) · ride-on + autonomous
Cleaning width610 mm
BrushCylindrical, 175 rpm, retracts when reversing · 25 kg pressure
Tanks58 L clean · 55 L recovery
Productivity2,745 m²/h rated · 1,400 m²/h observed
Weight208 kg (349 kg gross)
Turning radius2,500 mm
Runtime1.3 h (80 min, 6 × i-power 14)
Navigation2D camera mapping (no LiDAR)
Docking stationNo
Carpet compatibleNo
DistributionAsk us about availability
Commercial status 2026On the market

Fit by environment

Surface tier58 L of water and 1,400 m²/h observed, the best in the i-team range: large open areas. But the 80-minute runtime is the shortest of the i-team models we cover: plan for spare batteries to get through a shift.
Footprint / aislesRide-on, 2,500 mm turning radius: large unobstructed areas only. Not a robot for tight spaces.
Floors and soilingCylindrical brush at 25 kg pressure, retracting when reversing: effective on stubborn soiling on hard floors. No carpet. Large debris must be swept up beforehand.
Public / hoursRide-on, driven or autonomous: the mode of use should be defined for each site.
NavigationPoint to watch: no LiDAR, 2D camera mapping. Less robust than multi-sensor navigation in complex or changing environments.
Water handlingNo docking station: the 58 / 55 L tanks are filled and drained by hand.

Floors and soiling

A ride-on scrubber for hard floors: stubborn, wet soiling on large open areas, in logistics and manufacturing. No carpet. Large debris must be swept up beforehand. Its high observed productivity suits it to deep scrubbing of large unobstructed floors.

What the manufacturer does not say

The 80-minute runtime is the real constraint. The best productivity in the range comes at the price of a short runtime: without spare batteries, the shift is limited.

No LiDAR. 2D camera mapping is less robust than multi-sensor navigation: to be assessed on complex or high-traffic sites.

A ride-on first and foremost. It can also be driven manually, which provides a fallback, but that implies an operator's seat. Cost structure: machine + spare batteries + consumables.

Buying or contracting out

If you buy (capex), the best productivity in the range comes with an 80-minute runtime and camera navigation without LiDAR, which is less robust on complex sites: two limitations to build in. Under a full-service contract (opex), the contractor manages the battery rotations across the shift and carries the continuity commitment. See the Pudu range and the on-site demonstration, or our robotic cleaning service.

Strengths and limitations

Strengths

  • Best observed productivity in the i-team range (1,400 m²/h).
  • High brush pressure (25 kg), retracting cylindrical brush.
  • Ride-on, driven or autonomous; distributed through the i-team network.

Limitations

  • 80-minute runtime: the shortest of the i-team models we cover.
  • No LiDAR (2D camera mapping).
  • 2,500 mm turning radius, no docking station.

Alternatives

  • In the i-team range: the co-botic 45 (compact) for smaller floor areas.
  • Against large-area scrubbers: the Kärcher KIRA B 50 and the Gausium Scrubber 75.

For a comparison with the Pudu BG1, see the Pudu BG1 profile. To put figures on it: request a quotation, weigh up rental against purchase, or book an on-site demonstration.

Sources

Consulted on 16/07/2026: i-team product page and distributor pages for the co-botic 65; internal robot database (v39). Values marked "n/p" are not published by the manufacturer. No price is published: available on request.

Frequently asked questions

What is the runtime of the co-botic 65?
80 minutes, the shortest in the i-team range: plan for spare batteries.
Does it have LiDAR?
No, navigation relies on 2D camera mapping.
Can it be driven manually?
Yes, it is a ride-on scrubber that also runs autonomously.
What does it cost?
Price on request. Tell us about your site and we will come back with availability and a quotation.
The full-service contract No capital outlay All-inclusive, per month Per robot. Equipment, maintenance, parts, consumables and replacement within 72 h. See the offer → Purchase with maintenance contract The robot on your balance sheet Purchase + maintenance The robot becomes your asset; the contract covers servicing and parts. See the offer →

Compare the two options, criterion by criterion →

Interested in the i-team co-botic 65, or in an alternative?

Ask us: we will tell you plainly whether this model suits your floors, and what we would do in your position. Reply within one working day.

Ask about this model Talk to us See our range →