Robotic cleaning easy to clean easy to carry Robotic handling
Talk to us
Robot profile · CVTE

CVTE C3 · specs, operator review and alternatives (2026)

The CVTE C3 is a 4-in-1 cleaning robot for medium to large surfaces, aimed at restaurants, hotels, offices, shopping centres, retail and logistics. It sweeps, vacuums, scrubs and dries in a single pass, relies on an all-in-one station (charging, clean water, waste water, dust disposal) and runs below 60 dBA in quiet mode. Observed productivity of 500 to 650 m²/h depending on the data sheet. Price and availability on request.

At a glance

Type4-in-1 cleaning robot (single pass)
ManufacturerCVTE
FunctionsSweeping, vacuuming, scrubbing, drying
Productivity500 to 650 m²/h depending on the data sheet
Runtime4 h
Noise levelUnder 60 dBA (quiet mode)
Docking stationAll-in-one (charging, clean water, waste water, dust)
Commercial modelPurchase, rental or RaaS · price on request
Verified on16/07/2026 · CSV v39

Technical data

Function4-in-1: sweeping, vacuuming, scrubbing, drying (single pass)
Productivity500 to 650 m²/h (500 quoted by the distributor, 650 on some data sheets)
Runtime4 h
Speed0.4 m/s (quiet mode)
Noise levelUnder 60 dBA (laboratory measurement at 1 m)
Docking stationCharging, clean-water filling, waste-water draining, dust disposal
Carpet compatibleAll floor types claimed (to be confirmed)
DistributionAsk us about availability
Commercial status 2026On the market

Fit by environment

Surface tier4 h runtime and an all-in-one station: medium to large surfaces in continuous operation. Productivity of 500 to 650 m²/h depending on the source.
Footprint / aislesCompact, quiet mode: at home in restaurants, hotels and occupied offices.
Floors and soilingSignature feature: 4-in-1 in a single pass (sweeping, vacuuming, scrubbing, drying). One machine covers the whole sequence. Carpet compatibility is claimed but still to be confirmed.
Public / opening hoursUnder 60 dBA in quiet mode: very discreet, usable during the day on an occupied site.
Process autonomyThe all-in-one station (charging, clean water, waste water, dust) automates the complete cycle: a genuine asset for continuous operation.
DataProductivity quoted as a wide range (500 to 650) depending on the data sheet: have it clarified at quotation stage.

Floors and soiling

A 4-in-1 robot for hard floors: it sweeps, vacuums, scrubs and dries in one pass, covering the whole cleaning sequence on mixed surfaces. Carpet compatibility is claimed, to be confirmed. Large debris must be swept up beforehand. Its all-in-one station makes it a solution for continuous operation.

What the manufacturer does not say

The single-pass 4-in-1 is the real asset. Combining sweeping, vacuuming, scrubbing and drying avoids running several machines one after another: a single unit covers the sequence, which simplifies operation.

The station completes the process autonomy. Charging, clean water, waste water and dust are all handled automatically: few interventions between cycles.

Productivity varies by source. 500 to 650 m²/h depending on the data sheet: use the lower figure for a cautious sizing. Cost structure: machine + station + consumables.

Buying or contracting out

If you buy (capex), the single-pass 4-in-1 and the all-in-one station limit interventions, but the ambiguity around productivity (500 to 650 m²/h depending on the source) makes sizing tricky for a buyer working alone. Under a full-service contract (opex), the contractor calibrates the real throughput on site and carries the continuity commitment. See the Pudu range and the on-site demonstration, or our robotic cleaning service.

Strengths and limitations

Strengths

  • 4-in-1 in a single pass (sweeping, vacuuming, scrubbing, drying).
  • All-in-one station, very discreet (under 60 dBA).
  • Continuous operation, distributed through resellers.

Limitations

  • Productivity quoted as a wide range (500 to 650 m²/h).
  • 4 h runtime, modest speed (0.4 m/s).
  • Carpet compatibility to be confirmed.

Alternatives

  • Against other multifunction robots with a station: the Gausium Phantas and the Pudu CC1 / CC1 Pro.
  • For an available 4-in-1: the Sveabot S100 (subject to confirmation), depending on distribution.

For a comparison with the Pudu CC1, see the Pudu CC1 profile. To put figures on it: request a quotation, weigh up rental against purchase, or book an on-site demonstration.

Sources

Consulted on 16/07/2026: CVTE product and distributor pages for the C3; internal robot database (v39). Values marked "n/p" are not published by the manufacturer. No price is published: available on request.

Frequently asked questions

What does the CVTE C3 do?
It sweeps, vacuums, scrubs and dries in a single pass, with an all-in-one station.
Is it quiet?
Yes, under 60 dBA in quiet mode.
What is its productivity?
500 to 650 m²/h depending on the data sheet.
What does it cost?
Price on request. Tell us about your site and we will come back with availability and a quotation.
The full-service contract No capital outlay All-inclusive, per month Per robot. Equipment, maintenance, parts, consumables and replacement within 72 h. See the offer → Purchase with maintenance contract The robot on your balance sheet Purchase + maintenance The robot becomes your asset; the contract covers servicing and parts. See the offer →

Compare the two options, criterion by criterion →

Interested in the CVTE C3, or in an alternative?

Ask us: we will tell you plainly whether this model suits your floors, and what we would do in your position. Reply within one working day.

Ask about this model Talk to us See our range →