Robotic cleaning easy to clean easy to carry Robotic handling
Talk to us
Robot profile · Nilfisk

Nilfisk Liberty SC60 · specs, operator review and alternatives (2026)

The Nilfisk Liberty SC60 is a ride-on industrial autonomous floor scrubber launched in 2021 for warehouses, airports, large retail sites, schools and hospitals. It scrubs a 710 mm path, carries 99 L of water and stands out for its very quiet operation (57 dBA) and the choice between a disc head (X71D) and a cylindrical head (X71C) to suit the floor. It runs on the mature BrainOS platform. Price and availability on request.

Nilfisk Liberty SC60, overall view of the Nilfisk cleaning robot

At a glance

TypeIndustrial autonomous floor scrubber (ride-on)
Manufacturer / yearNilfisk · 2021
Cleaning width710 mm
Tanks99 L clean water · 105 L recovery
HeadsDisc (X71D) or cylindrical (X71C)
Productivity2,811 m²/h rated
Runtime4.5 to 5.5 h
Weight≈ 500 kg (680 kg gross weight)
Noise level57 dBA (IEC 60335-2-72)
Business modelPurchase, rental or RaaS · price on request
Verified on16/07/2026 · CSV v39

Technical data

FunctionFloor scrubber (hard floor scrubbing) · ride-on converted to autonomous
Cleaning width710 mm
HeadsX71D disc or X71C cylindrical
Tanks99 L clean · 105 L recovery · optional debris hopper (kit)
Water savingEcoflex / SmartFlow (programmable water and detergent dosing)
Productivity2,811 m²/h rated
Weight≈ 500 kg (680 kg gross weight)
Maximum gradient1.15° (autonomous mode)
U-turn1,880 mm (manual)
Runtime4.5 to 5.5 h · AGM lead-acid battery
Noise level57 dBA (IEC 60335-2-72)
NavigationHokuyo 2D LiDAR · BrainOS cameras
Docking stationNo
Carpet compatibleNo
ReferencesTORP airport, University of Calgary
DistributionAsk us about availability
Commercial status 2026On the market

Reading by environment

Floor area tier99 L of water and 2,811 m²/h rated: large floors. The largest BrainOS platform in the Nilfisk range.
Footprint / aislesA 710 mm ride-on with a 1,880 mm manual U-turn and 680 kg gross weight: large, open sites.
Floors and soilingThe head choice shapes the use case: disc (X71D) for smooth floors, cylindrical (X71C) for textured or heavily soiled floors, with an optional debris hopper on the cylindrical version. No carpet.
Public / opening hoursA distinctive asset: 57 dBA, among the quietest in its category, measured to IEC 60335-2-72. Comfortable in busy facilities (schools, hospitals).
Floor / topography1.15° gradient in autonomous mode (≈ 2%): near-level floors are practically a requirement; check on site.
PlumbingNo docking station: the 99 / 105 L tanks are filled and emptied by hand, eased by SmartFlow dosing.

Floors and soiling

An industrial scrubber for hard floors whose head determines the terrain: disc (X71D) for smooth floors, cylindrical (X71C) for textured or soiled floors, with debris pick-up via the hopper kit. No carpet. Bulky waste must be dealt with beforehand. Its quietness (57 dBA) widens the usable time slots on busy sites.

What the manufacturer does not say

Quietness is a genuine argument. At 57 dBA the SC60 ranks among the most discreet industrial scrubbers: a concrete advantage in schools and hospitals, where noise dictates the cleaning slots.

The head choice commits you to a floor type. Disc for smooth, cylindrical for textured: this is not a finish level but a terrain choice, as on large twin-head machines.

AGM lead-acid battery and low gradient. Lead-acid (heavier and less enduring than lithium) and a 2% gradient in autonomous mode: two limits to weigh up. Cost structure: machine + heads and debris kit + manual water handling.

Purchase or full-service contract

On purchase (capex), the quietness (57 dBA) widens the cleaning slots in schools and hospitals, but the head choice commits you to a floor type (disc for smooth, cylindrical for textured), a real on-the-ground trade-off. Under a full-service contract (opex), the contractor sets that configuration and takes on continuity. See the Pudu range and the on-site demonstration, or our robotic cleaning service.

Strengths and limits

Strengths

  • Very quiet (57 dBA): busy, noise-sensitive sites.
  • Choice of disc or cylindrical head to suit the floor.
  • Mature BrainOS platform, distributed through the Nilfisk network.

Limits

  • AGM lead-acid battery, 2% gradient in autonomous mode.
  • No docking station, 1,880 mm U-turn.
  • Scrubbing only, no carpet.

Alternatives

  • Within the Nilfisk range: the Liberty SC50 (compact, with a UVGI variant) below it.
  • Against other large autonomous scrubbers: the Kärcher KIRA B 200 and the Tennant T16AMR.

To compare with a Pudu BG1 Pro, see the Pudu BG1 Pro profile. To put figures on it: how much does it cost?, rental or purchase? or an on-site demonstration.

Sources

Consulted on 16/07/2026: Nilfisk product page for the Liberty SC60; internal robot database (v39). Values marked "n/p" are not published. No price is displayed: on request.

Frequently asked questions

Is the SC60 quiet?
Yes: 57 dBA, among the most discreet in its category, an asset in schools and hospitals.
What is the difference between the X71D and the X71C?
The head: disc (X71D) for smooth floors, cylindrical (X71C) for textured or soiled floors.
Can it handle slopes?
Barely: 1.15° in autonomous mode, practically level floors only.
What does it cost?
Price on request. Tell us about your site and we will come back with availability and a quotation.
Full-service contract No capital outlay All inclusive, per month Per robot. Equipment, maintenance, parts, consumables and replacement within 72 h. See the offer → Purchase with maintenance contract The robot on your balance sheet Purchase + maintenance The robot becomes your asset; the contract covers servicing and parts. See the offer →

Compare the two options, criterion by criterion →

Interested in the Nilfisk Liberty SC60, or in an alternative?

Ask us: we will tell you plainly whether this model suits your floors, and what we would do in your place. Reply within one working day.

Ask a question about this model Talk to us See our range →